Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Cap & Crown in Jersey City: What to Know First
We provide independent Olympia Chimney chimney cap and crown service in Jersey City, from standard cap swaps to full crown rebuilds on multi-flue setups. Most Olympia Chimney jobs run $280 to $780 depending on whether we’re fitting a new Gelco-style cap or repairing a poured crown that’s taken a beating from Hudson County freeze-thaw. We’re not a chain operation, and we don’t guess at what’s wrong - our techs bring a Level-2 camera to every inspection so you see what we see.
This page is for Jersey City homeowners who already have Olympia Chimney components on their stack and need them repaired or replaced correctly the first time. If that’s you, call (732) 507-9649 and a live person will pick up, any hour of any day.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney 304 stainless single-flue caps in Paulus Hook brownstones: The mesh on these caps is 5/8-inch weave, which is fine for most applications, but Jersey City’s tree canopy along Washington Street drops more debris than the designers probably planned for. We see the mesh solder joints fatigue after seven to ten years, not from rust but from repeated impact. We either resolder with a heavier gauge or step up to an Olympia Chimney 316-grade cap if the flue gases run acidic.
- Olympia Chimney multi-flue caps on Bergen-Lafayette twins: The cross-brace design on older Olympia Chimney multi-flue units doesn’t always account for the slight settling that happens in 1920s masonry. The cap ends up canted, and rainwater tracks to the low corner instead of shedding evenly. We shim with stainless spacers or recommend a custom-fabricated cap with adjustable legs rather than fighting the brick.
- Olympia Chimney crown wash failures: The factory crown coating Olympia Chimney sells is a cementitious product that needs proper curing temperature - tough to guarantee when Jersey City hits a February cold snap right after installation. We’ve learned to schedule crown work for windows when overnight lows stay above 40 degrees, or we switch to a polymer-modified crown coat that cures in colder conditions.
- Olympia Chimney draft-inducer caps in waterfront condos: These caps have a built-in wind vane that can seize when salt spray crystallizes in the bearing race. We’ve pulled these off buildings near Liberty Harbor where the vane hadn’t moved in two seasons. We disassemble, flush with fresh water, relubricate with marine-grade grease, and document whether the cap body is still worth keeping.
- Olympia Chimney chase covers on prefab units: The galvanized steel chase covers on older Olympia Chimney prefab installations were rated for 15-year life, but Jersey City’s combination of humidity and industrial particulate cuts that closer to ten. We measure in person - these covers must overhang the chase by exact dimensions - and we fabricate replacements from 24-gauge stainless or copper if the homeowner wants to match a historic roofline.
Our Olympia Chimney Chimney Cap & Crown Process
- 1
Call and schedule. A live person answers, checks our calendar, and books a two-hour arrival window. No app, no callback tag.
- 2
Level-2 camera inspection. We run a camera up the flue before touching the cap or crown. We’ve found cracked flue liners hiding under perfectly good-looking Olympia Chimney caps in Jersey City - fix the cap first and you’ve wasted the customer’s money.
- 3
Parts decision with photos. We show you what we found. If your Olympia Chimney cap is a current model, we can source OEM. If it’s discontinued, we match with Gelco or Famco equivalents that fit the same footprint and won’t void any remaining warranty on the flue system.
- 4
The repair. Crown work gets formed and poured, or coated, with temperature-appropriate material. Cap installs get stainless fasteners, never galvanized, and we seal the perimeter with high-temp silicone rated for the flue gas temperature your appliance produces.
- 5
Post-repair verification. We camera again to confirm nothing shifted during the work, then draft-test if the system allows. You get photos, a plain-English write-up, and the 90-Day Done Right Promise in writing.
- 6
Cleanup and closeout. We haul the old material. The price matches the estimate. If it’s not right, we come back until it is.
What Olympia Chimney Chimney Cap & Crown Costs in Jersey City
These are real numbers from our last twelve months of Olympia Chimney jobs in Jersey City. Your exact price depends on access, height, and what the camera shows:
| Olympia Chimney single-flue cap replacement (standard size) | $280 - $420 |
| Olympia Chimney multi-flue cap replacement | $450 - $680 |
| Crown coating (minor cracking, under 3 linear feet) | $320 - $480 |
| Partial crown rebuild (spalling, rebar exposed) | $580 - $890 |
| Custom-fabricated cap (copper or specialty dimension) | $720 - $1,400 |
What moves the price up: three-story walk-up with no roof access, crown demolition requiring formwork, or discovering the flue tile needs resetting before the cap can seat properly. What doesn’t move the price: we don’t charge extra for the camera inspection or the photo report. Those are part of the job.
Call (732) 507-9649 for a free estimate - we bring a ladder and a camera, and you’ll know exactly where you stand before we order a single part.
Why Jersey City Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We’ve been in Jersey City long enough to know which brownstones have the original coal flues and which condo conversions have prefab systems that need a different approach entirely. Russell Haines learned this trade at Los Angeles Trade-Technical College, then spent twenty years on chimneys up and down the East Coast before settling here. He and our crew have worked the older masonry in Paulus Hook enough to recognize when an Olympia Chimney cap is failing because of the cap, or because the crown beneath it has settled.
We’re not a chain. We’re not a one-truck operator who might answer the phone next week. Our 90-Day Done Right Promise is in writing with no arguing. Our phones are staffed by a live person 24 hours a day. And when an Olympia Chimney part is backordered, we have working relationships with DuraFlex, HeatShield, and Gelco - professional-grade brands we’ve used for years - so your job doesn’t sit idle.
Most jobs finish in a single visit. The number on the estimate is the number on the invoice. Done right - and we stand behind it.
FAQs
No. As an independent Olympia Chimney service provider, we use OEM or equivalent professional-grade parts and document our work with photos, which satisfies warranty requirements. We are not affiliated with or authorized by Olympia Chimney, but we know their product lines well enough to keep your coverage intact. Call (732) 507-9649 if you want us to review your warranty paperwork before we start.
Most single-flue replacements take two to three hours from ladder set to final photo. Multi-flue caps or jobs requiring crown repair first can run four to six hours. We book enough time in the day that we’re not rushing to the next call. If it’s not right, we come back until it is.
Usually yes. We keep dimensional records on discontinued Olympia Chimney models, and we fabricate or source equivalent caps from Famco or Gelco that match the footprint and screen spec. If your cap was custom-sized for a non-standard flue, we measure on site and have a local fabricator cut stainless to fit.
Pull the cap and look, or better, let us camera it. Crown damage shows as alligator cracking, spalling, or pooling water - and in Jersey City, freeze-thaw accelerates all three. If the crown is sound but the cap is rusted, we replace the cap. If the crown is compromised, a new cap will leak within a season. We show you the camera footage and tell you straight which path saves money long-term.
Yes, because we want you to see the camera footage as we shoot it. The estimate is free, but more importantly, it’s accurate - no surprises on the bill later. We can access the roof from outside, but the conversation about what we found matters, and that happens with you. Call (732) 507-9649 to book a time that works.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Jersey City and nearby areas.